MD

Info Software

Displays the current software version installed on the METAL SHARK® 2.

Main Screen

Set which screen is displayed after you switch on the METAL SHARK® 2.

CIP MENU

The CIP MENU (CIP = Clean In Place) is for pipeline models only (METAL SHARK® IN LIQUID).
If activated, the reject device toggles between positions “NORMAL” (production) and “REJECT” as long as the CIP input is in state HIGH. Cleaning fluid running through the product pipes cleans all interior surfaces of the reject device.

Interface

Monitor the settings of the INTERFACE for communication

Counter

Displays the METAL COUNTER and TOTAL COUNTER.

Reports

Monitor the production and to automize data logging.

AUTOSPEED MENU

Automatic setting of SPEED mm/s according to an electrical signal on AIN2 (Input terminal #3).

Belt Splice Detector GN2

Installation Manual – Belt splice detector GN2 (metal splice) #10250039. The belt splice detector is optional equipment. When a metal belt splice passes the metal detector, it sets the metal sensitivity to a less sensitive threshold.